Stationary Netting Installation
- INSTALL EYE BOLTS ON POSTS WHERE EACH CABLE RUN WILL BE PLACED (EYE BOLTS ARE NOT PROVIDED UNLESS SPECIFIED)
- HORIZONTAL CABLE ASSEMBLY INSTALL
A. Connect One end of Cable to Turnbuckle by Forming Loop and Securing With (2) Cable Clamps, Connect Turnbuckle to Eye Bolt.
B. Connect the Other End of Cable Assembly to Eye Bolt on Opposite Post by Forming Loop in Cable End and Securing by (2) Cable Clamps.
C. Tension Cable Using Turnbuckle
D. Repeat as Needed to Complete Install of Cable Assembly Units.
PLEASE NOTE LOCATION OF CABLE RUNS DETERMINED IN FIELD BY NET SIZE AND PLACEMENT OF NET ON POSTS
- NET INSTALL
A. Attach Top of Net to Horizontal Cable Run Using Provided Spring Clips or Net Clips – Spaced @ 18”.
B. Attach Bottom of Net to Horizontal Cable Run Using Provided Spring Clips or Net Clips – Spaced @ 18”.
C. Attach Sides of Net to Post with Provided Lacing Twine (Lace Twine Through Net Edges & Around Posts)
D. Repeat Steps as Needed Until all Net Panels are Installed.
PLEASE NOTE IF USED IN COMBINATION WITH EXISTING FENCE, NET BOTTOM IS ATTACHED TO FENCE TOP WITH LACING TWINE